Countersinks / Screw Pilots
Brand: TORK CRAFT
MPN: T AD0345
DRILL BIT ADAPTOR SET 3PC 3.4.5MM FEM RND- GRUB SCREW TYPE 1/4'M HEX S....
N$ 229.31
Ex VAT:N$ 199.40
Brand: TORK CRAFT
MPN: T CS005
Countersink 5 Piece Set with Bit Holder
The odd number of flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drilling or tapping operation thereby improving the finish of the product and removing any hazardous sh..
N$ 272.09
Ex VAT:N$ 236.60
Brand: TORK CRAFT
MPN: T CS101
Countersink HSS - 5Flute 6mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drilling or t..
N$ 110.75
Ex VAT:N$ 96.30
Brand: TORK CRAFT
MPN: T CS102
Countersink HSS - 5Flute 3/8” 10mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 116.04
Ex VAT:N$ 100.90
Brand: TORK CRAFT
MPN: T CS103
Countersink HSS - 5Flute 1/2” 12mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 119.49
Ex VAT:N$ 103.90
Brand: TORK CRAFT
MPN: T CS104
Countersink HSS - 5Flute 5/8” 16mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 167.27
Ex VAT:N$ 145.45
Brand: TORK CRAFT
MPN: T CS105
Countersink HSS - 5Flute 5/8” 19mm 90°
The five flute rose pattern design has been a principle countersink design for over 100 years. The odd number of
flutes reduces chatter on steel, brass and aluminium. Also used for plastic and wood application.
A common use is to allow the head of a countersunk bolt or screw, when placed in the hole, to sit flush with or
below the surface of the surrounding material. A countersink may also be used to remove the burr left from a
drillin..
N$ 215.63
Ex VAT:N$ 187.50
Brand: TORK CRAFT
MPN: T CS201
Carbon Steel Countersink - 1/4” (6.35mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 56.29
Ex VAT:N$ 48.95
Brand: TORK CRAFT
MPN: T CS202
Carbon Steel Countersink - 3/8” (9.5mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving th..
N$ 58.02
Ex VAT:N$ 50.45
Brand: TORK CRAFT
MPN: T CS203
Carbon Steel Countersink - 1/2” (12.7mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 61.47
Ex VAT:N$ 53.45
Brand: TORK CRAFT
MPN: T CS204
Carbon Steel Countersink - 5/8" (15.9mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving t..
N$ 71.70
Ex VAT:N$ 62.35
Brand: TORK CRAFT
MPN: T CS205
Carbon Steel Countersink - 3/4" (19mm)
Countersink for Wood
A countersink is a conical hole cut into a manufactured object.
The same term is used for the cutter used to cut such a hole.
Common uses:
A common use is to allow the head of a countersunk bolt or screw, when placed
in the hole, to sit flush with or below the surface of the surrounding material.
A countersink may also be used to remove the burr left from a drilling or
tapping operation thereby improving the..
N$ 75.10
Ex VAT:N$ 65.30